
Licensed, insured, IICRC-certified mold removal done right the first time
Mold Remediation Company in NEWBURY PARK, California
When you need a Mold Remediation Company in NEWBURY PARK, California that shows up fast and finishes the job, we're the crew to call. Our licensed mold removal contractor in NEWBURY PARK handles hidden mold behind drywall, black mold on bathroom ceilings, and crawl space growth before it spreads. Same-day inspections, honest pricing, and a written warranty on every remediation.
What's included
What's Included in Our Mold Remediation Service
Every remediation job we do in NEWBURY PARK includes the same core scope. What varies is the size of the affected area and whether structural repairs or a vapor barrier are needed. Here's what you get as standard.
Full Inspection and Moisture Mapping
Thermal imaging, pin-type moisture meter readings, and boroscope inspection of wall cavities. We document every affected area with photos and moisture logs so you can see exactly what we found and why it needs remediation.
Containment and Negative Air Setup
6-mil poly containment with zipper doors, a negative air machine with HEPA filtration, and daily particle counts on larger jobs. This keeps spores from spreading into clean areas of your home while we work.
Removal of Contaminated Materials
Contaminated drywall, insulation, and porous materials are removed, bagged, and disposed of per California Department of Public Health guidelines. Structural framing is HEPA-vacuumed and treated with antimicrobial solution.
Antimicrobial Treatment and Encapsulation
We apply antimicrobial solution to all affected surfaces, then fog wall cavities with a fogging machine to reach areas a rag can't. Framing and structural surfaces get an encapsulation coating to seal the wood and prevent future growth.
Post-Remediation Clearance Testing
A third-party inspector runs air samples and, when needed, surface swabs. If clearance fails, we re-clean at no additional cost. You get the lab report, photo documentation, and written warranty in a single handoff package.
Written Workmanship Warranty
Every remediation comes with a written workmanship warranty. If mold returns to an area we treated and the moisture source hasn't come back, we return and fix it. Warranty documentation is included in your job binder.
Service overview
What a Mold Remediation Company in NEWBURY PARK, California Does
Mold remediation is not a wipe-down with bleach. A real Mold Remediation Company in NEWBURY PARK, California finds the moisture source first, contains the affected area with negative air pressure, then physically removes contaminated drywall, insulation, and framing before treating what stays. We use thermal imaging cameras and moisture meters to map the problem, HEPA vacuums and air scrubbers to capture spores, and an antimicrobial solution followed by an encapsulation coating to stop regrowth.
NEWBURY PARK homes sit in a climate that swings from dry Santa Ana winds to cool, damp mornings off the Conejo Valley, and that cycle feeds mold in attics, crawl spaces, and bathrooms. If you've had a slab leak, a roof leak after winter rain, or a musty odor from your HVAC system, you're looking at a job for a mold removal contractor in NEWBURY PARK - not a handyman. We handle everything from a single bathroom to a full crawl space, and we test after remediation so you have documentation.
The service timeline
Our Mold Remediation Process, Step by Step
The process flexes to the condition, but these checkpoints keep decisions clear.
Inspection & Testing
We start with a full visual inspection plus moisture mapping using a thermal imaging camera and pin-type moisture meter. If we suspect hidden growth, we run a boroscope inspection camera into wall cavities. Air and surface samples go to an accredited lab, and you typically have results in 24 to 48 hours. This step tells us the species, the spore count, and the true extent of the problem.
Containment & Negative Air
We seal off the work zone with 6-mil poly sheeting and set up a negative air machine with HEPA filtration. This keeps spores from migrating into clean rooms while we work. On larger jobs we add a second air scrubber and run daily particle counts. Setup usually takes two to three hours depending on the size of the affected area.
Removal & HEPA Cleaning
Contaminated drywall, insulation, and porous materials come out and get bagged. Structural framing gets HEPA-vacuumed, then treated with an antimicrobial solution like Concrobium or Benefect. For heavy surface growth on joists or subfloor, we use dry ice blasting or RMR-86 to strip the colony without soaking the wood. This is the dirtiest part of the job - usually one to three days.
Treatment & Encapsulation
After cleaning, we fog the cavity with a fogging machine to reach areas a rag can't. Then we apply an encapsulation coating to framing and any remaining structural surfaces. This seals the wood and makes it inhospitable to future growth. In crawl spaces we also install a vapor barrier to cut ground moisture - the root cause of most recurring mold.
Clearance Testing & Handoff
We don't call a job done until it passes. A third-party inspector runs post-remediation mold testing - air samples and, when needed, surface swabs. If clearance fails, we re-clean at no additional cost. Once it passes, you get the lab report, photo documentation, and your written warranty. Most residential jobs wrap in three to seven days total.
Tools & methods
Tools and Methods We Use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Thermal Imaging Camera
Detects temperature differentials that reveal hidden moisture behind drywall, under flooring, and inside wall cavities - without demolition.
Pin-Type Moisture Meter
Confirms actual moisture content in drywall, framing, and subfloor. We log readings before, during, and after remediation to document dry-down.
Boroscope Inspection Camera
Slips into wall cavities and ductwork through a small hole to visually confirm mold growth without opening up the whole wall.
Negative Air Machine with HEPA Filtration
Creates negative pressure inside containment so spores can't migrate into clean areas. Runs continuously during demolition and cleaning.
Air Scrubber with HEPA Filters
Continuously filters airborne particles inside the containment zone. We run additional scrubbers on larger jobs and track particle counts daily.
Fogging Machine
Applies antimicrobial solution as a fine mist that reaches wall cavities, framing voids, and other areas a sprayer or rag can't touch.
Dry Ice Blasting Machine
Strips mold off framing, joists, and subfloor without water or abrasive media. Faster and cleaner than sanding, and leaves no secondary cleanup.
Use cases
When to Call a Mold Remediation Company
These examples show how the service framework adapts rather than forcing every call through one repair.

Crawl Space Mold in Conejo Oaks
Bare soil and poor drainage had kept the crawl space at 70%+ relative humidity for years. Joists and subfloor were covered in white and black growth across roughly 800 square feet. Insulation was saturated and had to come out. The musty smell was noticeable throughout the house. → We removed all contaminated insulation, HEPA-vacuumed and treated the framing with antimicrobial, and installed a reinforced vapor barrier across the entire crawl space floor and up the foundation walls. Post-remediation air sampling showed spore counts back to outdoor baseline levels.
Attic Mold After Roof Leak in Dos Vientos
A roof flashing failure during winter rain had been leaking into the attic for at least two seasons. Mold covered roughly 200 square feet of sheathing and had spread into the insulation. The homeowner only noticed when a ceiling stain appeared in the hallway below. → We removed contaminated sheathing and insulation, dry ice blasted the framing to strip surface growth, and treated all remaining wood with antimicrobial and encapsulation coating. The roofer fixed the flashing before we started. Clearance testing passed in four days.
Problems we solve
Mold Problems We Solve in NEWBURY PARK
Most mold calls we get fall into a handful of categories. Here's what we see most often and how we handle it.
Hidden mold behind drywall after a slow leak
We use thermal imaging and a boroscope inspection camera to find the extent without tearing out the whole wall. Then we remove only what's contaminated, treat the framing with antimicrobial, and encapsulate. Most jobs like this run two to three days.
Black mold on bathroom ceiling from poor ventilation
We remove contaminated ceiling drywall, HEPA-vacuum the framing, treat with Benefect or Concrobium, and encapsulate. We also recommend a properly sized exhaust fan - usually 110 CFM or higher - to stop the cycle from repeating.
Crawl space mold growth from ground moisture
We remove contaminated insulation, treat framing with antimicrobial, and install a vapor barrier across the entire crawl space floor. In severe cases we add a dehumidifier. This is one of our most common jobs in older NEWBURY PARK homes.
Attic mold after a roof leak
We test to confirm species and extent, remove contaminated sheathing and insulation, dry ice blast or HEPA-clean the framing, and treat with antimicrobial. We also flag the roof repair so the leak gets fixed before remediation is considered complete.
Pricing process
Mold Remediation Pricing in NEWBURY PARK
$1,200 - $12,000 depending on scope
Square footage affected
The single biggest cost driver. A 10-square-foot bathroom ceiling is a very different job than an 800-square-foot crawl space. We measure the actual contaminated area during inspection, not a guess.
Materials that must be removed
Porous materials like drywall, insulation, and carpet almost always have to come out. Hard surfaces like tile, framing, and subfloor can often be treated and saved, which reduces cost significantly.
Access and containment complexity
Crawl spaces and attics are harder to contain and work in than a bathroom. Tight access, low clearance, or multiple rooms requiring separate containment zones all add labor time.
How much does a Mold Remediation Company cost in NEWBURY PARK California?
Typical 2026 pricing in NEWBURY PARK runs $1,200 to $3,500 for a single-room job like a bathroom or attic, and $4,000 to $12,000 for a full crawl space or multi-room remediation. Factors that move the number: square footage affected, whether drywall or framing has to come out, and whether a vapor barrier or encapsulation is needed. We give you a written, itemized quote after the inspection - no ballpark guesses over the phone.
How do I choose a mold removal contractor in NEWBURY PARK?
Check three things: a valid CSLB license, IICRC Mold Remediation Certification on the technicians doing the work, and whether they test after remediation. A contractor who skips clearance testing is asking you to take their word for it. Also ask if they carry general liability and workers' comp - if they don't, you're exposed if someone gets hurt on your property. We carry all three and provide documentation on request.
Is the Mold Remediation Company in NEWBURY PARK licensed and insured?
Yes. We hold a California Contractors State License Board (CSLB) license, carry general liability insurance, and maintain workers' compensation coverage for every employee. Our technicians are IICRC-certified, and our supervisors hold ACAC Certified Microbial Remediation Supervisor credentials. We're happy to provide license and insurance documentation before we start any work - just ask and we'll email it over the same day.
Does mold removal contractor near me in NEWBURY PARK California offer financing?
We offer payment options for larger remediation projects, including financing through third-party lenders with terms from 6 to 60 months. Most single-room jobs are paid at completion by check, card, or ACH. If you're filing an insurance claim, we can also work directly with your adjuster so you're only paying your deductible out of pocket. Ask about financing when we give you the written quote.
Ready when you are
Call the Mold Remediation Company in NEWBURY PARK, California Today
Mold gets worse every day you wait. Call (833) 929-5837 and we'll schedule a same-day inspection, give you a written scope with itemized pricing, and start remediation as soon as you approve. Licensed, insured, IICRC-certified, and warrantied.

Talk with the local team
Request Mold Remediation Company
Call us at (833) 929-5837 any time, day or night. We answer the phone 24/7 and can usually schedule an inspection the same day. If you prefer email, send photos of the affected area to info@moldremediationservicenewburypark.com and we will get back to you within a few hours.



